Researchers atRoyal Melbourne Institute of Technology(RMIT) in Australia have trialled a new material for metal 3D printing that combines titanium alloy with copper.
Developed by RMIT’s School of Engineering, titanium-copper alloys were created in a bid to prevent cracking and distortion that can affect titanium when 3D printing. RMIT states that the material can potentially lead to a new range of high-performance alloys for medical device and aerospace applications.
The collaborative project involved leading researchers in the area of alloy composition and grain microstructure from RMIT University,CSIRO,University of Queenslandand theOhio State University. Their findings were published in the science journalNature.
The problems with 3D printing in titanium
Titanium alloys are widely used in the additive manufacturing industry for a number of applications and verticals. Often, it is used to manufacture components and products foraerospace,medical,汽车and more. However, RMIT explains that, with the current offering of titanium alloys used in the additive manufacturing market, users’ 3D printed components are prone to cracking and distortion.
原因是“内在高冷却rates and high thermal gradient of the fusion-based metal additive manufacturing process,” as described by RMIT’s paper. This can lead to very fine microstructures, and causes titanium alloys to cool and bond together in column-shaped crystals, which can result in cracking or distortion. Additionally, RMIT has explained that there are no commercial grain refiners for titanium, which would allow manufacturers to refine the microstructure of the material and avoid the complications.
Overriding negative effects with copper
RMIT’s solution to the problem was combining titanium alloys with copper. Copper has proven to be a difficult material to process with additive manufacturing as it reflects the heat applied by a laser beam. Nevertheless, various firms includingGE Additive,Optomec， 和protolabshave recently released copper materials and services for 3D printing.
根据该论文，这些钛合金合金配备了高宪法过冷容量，这是由于合金元素在固化过程中的分配而引起的。这使得材料可以覆盖由添加剂制造过程中激光熔点区域中高热梯度引起的任何负面影响。
As a result, Professor Mark Easton from RMIT University’s School of Engineering states that objects 3D printed with the titanium–copper alloy portray “exceptional properties” without any special process control or additional treatment. “Of particular note was its fully equiaxed grain structure: this means the crystal grains had grown equally in all directions to form a strong bond, instead of in columns, which can lead to weak points liable to cracking.”
“Alloys with this microstructure can withstand much higher forces and will be much less likely to have defects, such as cracking or distortion during manufacture.”
From their findings, the researchers also suggest that other alloys can be treated in the same way in order to improve their properties when processed through 3D printing: “In general, it opens up the possibility of developing a new range of titanium-based alloys specifically developed for 3D printing with exceptional properties,” adds Dr Mark Gibson, CSIRO Senior Principal Research Scientist.
Researchers at RMIT have demonstrated continued research output in the field of metal 3D printing. In February, a PhD candidate at the university won a $15 thousand AUD ($10 thousand USD) prize for proving the3D printability of tool steel. RMIT has also led a project seeking to apply metal 3D printing toservice the Australian Defence Forces.
“Additive manufacturing of ultrafine-grained high-strength titanium alloys”张Duyao写的,Dong Qiu, Mark A. Gibson, Yufeng Zheng, Hamish L. Fraser, David H. StJohn and Mark A. Easton. It is published inNaturewith DOI 10.1038/s41586-019-1783-1.
Subscribe to the3D打印行业newsletterfor the latest news in additive manufacturing. You can also stay connected by following us onTwitterand liking us onFacebook.
Looking for a career in additive manufacturing? Visit3D Printing Jobsfor a selection of roles in the industry.
Featured image shows titanium and copper powder with 3D printed bars. Photo via RMIT.
