Fiberlogy, a Polish 3D printing filament manufacturer has launched a new 3D printing material.FiberSmoothis a filament made from polyvinyl butyral (PVB).
FiberSmooth allows 3D prints to be post-processed to a smooth and glossy finish. Post-processing the PVB polymer with isopropyl alcohol (IPA) either via an ‘IPA bath’ or vapor finishing, dissolves the outer edges leaving a layer-free surface.
The filament is designed for use withFused Deposition Modeling (FDM)(即熔丝加工(FFF)) 3 d打印机. FDM or FFF is a type of 3D printing technology where a plastic wire is melted and extruded by a nozzle onto a build platform. This layer-by-layer process leaves the surface of the 3D print uneven. To eliminate the uneven surface, a solvent such as IPA can be used. IPA as a solvent dissolves the uppermost layer that hardens the structure and blurs the boundaries in between layers.
3D printing and post-processing
A number of methods for post-processing 3D prints exist. Depending on requirements, for example, parts with specific mechanical properties or parts that have aesthetic needs, different methods will be more suitable. One method isvapor smoothing, a post-processing technique involving the 3D printed parts being exposed to a vaporized solvent. This technique is used mostly at the industrial level for enhancing the surface finish of 3D printed parts.
Engineers leverage coatings, utilize abrasive sanding, or apply the vapor smoothing technique to smooth out the surface of a 3D printed part. They expose the 3D print to solvent fumes to create a controlled chemical melt that redistributes the material upon liquefaction. This evens out the surface, improves shine, and seals any existing tiny cavities.
Several companies are active in the post-processing sector. For example,PostPro Surface Finishing (SF) was launched byAdditive Manufacturing Technologies (AMT), andVaporfuse surfacing (VFS)byDyeMansion. AMT is a UK-based provider of automated post-processing systems in the 3D printing sector. DyeMansion is a globally leading company that provides post-processing solutions for industrial polymer 3D printing.
Other materials in the Fiberlogy portfolio
Previously, our engineering team conducted a3D printing filament reviewusing several Fiberlogy materials and was satisfied with the results. Fiberlogy’s portfolio also featuresPET-G,Fiberflex 40D,Easy PLA. Fiberlogy has expanded upon the basic 3D printing materials palette in the past by modifying materials with additives. For example, the company’sEASY PET-Gcontains glycol, which is intended to improve the 3D printing experience by reducing typical problems such as stringing or filament burning.
Fiberlogy has also launched some other filaments with features that differ from FiberSmooth. These features contain impact-resistance, sustainability, low cost, and a matte finish look.PCTGis an impact-resistant filament which is an alternative to PET-G filament. This filament provides temperature resistance and high transparency. Fiberlogy highlighted, that this filament is ideal for home 3D printers as it does not require high temperatures.
REFILLis a non-spool cartridge accompanied by the reusable spool MASTERSPOOL standard. This filament is easy to handle as it can be printed by anyone. It is sustainable and cheaper in comparison with other filaments that are offered on disposable spools.
MattFlex 40Dis a filament used for the 3D printing of flexible materials. This filament is distinct because of its matte finish look. This filament is easily printable and enables efficiency in printing with a speed of up to 60mm/s.
FiberSmooth technical specifications and 3D printing parameters
Nozzle Temperature215-225°C
Bed Temperature75°C
Closed chambernot required
Fan75-100%
Flowrate90-100%
Printing Speed< 100 mm/s
Surfaceglass, masking tape
Retraction (direct)yes, 1-2 mm
Retraction (bowden)yes, 2-3 mm
Retraction Speed20-45 mm/s
Nominations for the3D Printing Industry Awards 2022have now commenced. Who do you think should make it to the shortlists for this year’s show? Nominate now, the form closes at the end of the month.
To stay up to date with the latest 3D printing news, don’t forget to subscribe to the3D Printing Industry newsletteror follow us onTwitter, or liking our page onFacebook.
While you’re here, why not subscribe to ourYoutubechannel? featuring discussion, debriefs, video shorts, and webinar replays.
Are you looking for a job in the additive manufacturing industry? Visit3D Printing Jobsfor a selection of roles in the industry.
