增材制造服务提供商和软件开发人员实现(NASDAQ:MTLS) has announced financial results for the fourth quarter and full-year ended December 31, 2019.
合并revenue for FY2019 increased 6.5 percent to €196.7 million for 2019, from €184.7 million for 2018. Total deferred revenue from annual software sales and maintenance contracts increased by 22.3 percent to €27.7 million from €22.6 million at the end of 2018.
For Q4 2019, Materialise’s revenue was reported at €50.7 million, a 3.5 percent increase compared to the same period in 2018 which was €49 million.
The Medical and Software segments of Materialise are credited as the main drivers of Q4 2019 and FY2019 revenue growth, whereas Materialise Manufacturing revenues were flat.
Executive Chairman of Materialise, Peter Leys, commented: “In 2019 we increased our revenues by almost 12 million EUR and grew our deferred revenues from software license and maintenance fees by an additional 5 million EUR. Our Adjusted EBITDA rose by more than 13 percent to 26,7 million EUR. Materialise Software and Materialise Medical both achieved record quarterly revenues while Materialise Manufacturing experienced headwinds from a difficult macro-environment.”
“We believe our continued solid and profitable growth and financial strength position us well to expand our existing business and capture new growth opportunities as our company enters its fourth decade and the additive manufacturing market continues to develop.”
通过细分市场实现收入
在三个业务部门中报告了物质收入：软件，医疗和制造业。在2019财年的总收入中，制造业占收入最大的份额，贡献了9420万欧元。与截至2018年12月31日的年份相比，这幅度下降了0.8％，制造业领域的收入为9500万欧元。
2019财年的物质软件细分市场的收入增长了11.4％，达到4,170万欧元，而2018年为3740万欧元。最大的增长来自Materalize Medical Sgement，在2019财年增长了16.4％，达到6080万欧元，而2019财年为5230万欧元。在上一年。
| 收入 | 2019财年 | 2018财年 | 差异数百万 | ％ |
| 实体软件 | 41,654 | 37,374 | 4,280 | 11.45％ |
| 实质性医疗 | 60,809 | 52,252 | 8,557 | 16.37％ |
| 实现Manufacturing | 94,156 | 94,956 | -800 | -0.84％ |
| 未分配 | 61 | 139 | -78 | -56.11％ |
| 合并 | 196,679 | 184,721 | 11,958 | 6.47% |
在止于2019年12月31日的三个月中，从物质制造业的收入下降了11.0％，至2130万欧元，而2018年同期相比，同期的2390万欧元。软件细分。
对于2019年第四季度，物料软件细分市场的增长率最高，从2018年第四季度的1000万欧元增长了20.7％，达到1,210万欧元。据报道，2019年第四季度的医疗部门收入为1720万欧元，而1500万欧元为1500万欧元。2018年同期，增长了14.1％。
| 收入 | 2019年第四季度 | 2018年第四季度 | 差异数百万 | ％ |
| 实体软件 | 12,124 | 10,044 | 2,080 | 20.70％ |
| 实质性医疗 | 17,209 | 15,081 | 2,128 | 14.11% |
| 实现Manufacturing | 21,295 | 23,926 | -2,631 | -10.99％ |
| 未分配 | 84 | -37 | 121 | -327.02％ |
| 合并 | 50,712 | 49,014 | 1,698 | 3.46% |
医疗设备解决方案的收入特别增长了16.9％，占医疗部门总收入的70％。这包括Engimplan acquisition实现于2019年8月1日完成。物质化收购了该公司75％的股份，该公司是一家总部位于巴西的骨科和Cranio-Maxillofacial（CMF）植入物和仪器的制造商。
据报道，该季度的毛利润为2860万欧元，占2019年第四季度总收入的56.4％。在2018年第四季度，毛利占总收入的55.6％。
在宣布结果之后的电话会议上，莱伊斯评论了医疗和软件细分市场的强劲表现：“虽然短期宏观经济前景尚不清楚，但我们相信我们的软件和医疗领域的良好表现一致，我们的强大资产负债表使我们良好地定位了我们的成长野心。”
可持续性和COVID-19的影响
除了其75％的Engimplan的收购外，Materizize在整个2019年的医疗部门都表现出强劲的产出。3D工具包模拟启发, and also invested in呼吸成像专家Fluidda。
实现has also focused its efforts on developing its software solutions as well. The company introduced newfeatures to its Magics 24 software2019年11月，包括下一代制造工具，旨在推动串行添加剂制造。此外，物质化引入了流媒体8软件at RAPID + TCT 2019, which intends to increase connectivity with the industrial factory floor.
Looking forward in 2020 and the next decade, Wilfried Vancraen CEO of Materialise made extensive comments on the importance of sustainability during the call: “What is going to be the core theme of this fourth decade? We strongly believe it will be sustainability. Our planet is in jeopardy. The younger generations challenge us to take action. Now is the time to show that technology and innovation in general, and 3D printing in particular, are part of the solution. The role that additive manufacturing can play in our joint quest to make the world more sustainable will be the main theme for the fourth decade of 3D printing.” Vancraen’s comments echoes those made by his colleague Bart Van der Schueren, CTO of Materialise, when asked about the3D打印趋势在2020年观看。
Furthermore, Vancraen also commented on the impact that the COVID-19 virus could have for Materialise in 2020, which has delayed the company’s World Summit event: “The summit has been postponed however to November 5 and 6 because of the worldwide both mandatory and voluntary restrictions on mobility in response to the COVID-19 virus. That brings us from the great opportunities of tomorrow to the harsh situation today. The global impact of the coronavirus that is also impacting Materialise.”
“受病毒本身或旨在遏制其扩散的急剧措施影响最大的区域是亚洲。该地区是添加剂制造业的增长市场，也是物质化[…]该病毒影响的第二个地区是欧洲，这是我们制造业领域的关键地区。”
The nominations for the2020 3D印刷行业奖现在打开。您认为谁应该成为今年演出的入围名单？现在有你的发言权。
Subscribe to the3D打印行业通讯for the latest news in additive manufacturing. You can also stay connected by following us onTwitter并喜欢我们Facebook。
寻找添加剂制造业的职业？访问3D打印作业在行业中选择一系列角色。
特色图显示Engimplan植入物。通过物质图像。
