3D Printing Industry first took a look at Canadian 3D printing company,AON3Din 2015. At the time they were raising funds for a successful Kickstarter. With a few years under their belts plus the validation of commercial success the company is now back on our radar.
With their AON-M 3D printer, the company is specifically targeting users who want to create quality industrial prints but without the need to use a specialized bureau or own an expensive industrial machine.
Opening up engineering plastics
With the ability to printadvanced materials such as PEEK. AON-M bridges the gap between desktop FDM machines and industrial models such as the Stratasys’ Fortus.
The use of materials such as PEEK and ULTEM, is somethingwe expect to be a big trend for this year. Particularly with more affordable machines being capable to print advanced materials such as the AON-M.
We asked some users of the AON-M 3D printer about how they see the possibilities. Matt Howlett of3D printing filament suppliers3DXTech said,
The future of 3D printing lies with advanced materials and the possibilities they enable. AON3D lets me print with engineering grade thermoplastics such as carbon-fiber reinforced PEEK at an order of magnitude less cost than was previously possible.
Additionally, the AON-M can produce warp-free, large volume 3D prints. This is possible due to the 3D printers’ heated build plate which ensures a consistent printing process. Particularly important when attempting to work with advanced materials. The heated build plate is coupled with dual forced-air chamber heaters to eliminate the effects of warping and cracking.
In-house production
The AON-M brings the power of batch production at a lower cost and enables in-house production. AON3D hope to provide an alternative to outsourcing 3D printing production to a bureau with expensive machines.
The AON-M facilitates batch production with its dual independently controlled tool-heads.
When coupled with a duplication mode function this allows the faster production of batch 3D prints. Having double the tool-heads means double the parts and speed.
Jay Evanovich, CEO and Co-Founder of Performance 3-d, explains how these features put AON3D above the rest,
We recently used our AON3D printer to print 300 electrical enclosures out of ABS, as part of a contract manufacturing job for a high-end audio corporation. On a “large” desktop printer we could barely fit 4 parts at a time – with the AON-M we were doing 12+ at once using the dual heads and the large build plate. Outsourcing this to a shop with a Stratasys machine would have cost a fortune, taken longer, and would not have yielded any improvement in part quality.
TheAON-M 3D printer is available here.
Technical Specifications
Printing
TechnologyFFF (Fused Filament Fabrication)
Build Volume (mm)454 x 454 x 640
Max Speed500mm/s
Z Layer Height≥0.05mm
Max. Temperatures
Hot End450°C+
Heated Bed150°C+
Build Chamber70°C
Nozzle Sizes (mm)0.6 by default – 0.4, 0.8, 1.0, 1.2 also available
Filament Size (mm)1.75
MaterialsABS, ASA, PLA, HIPS, Nylon, PETx, Polycarbonate, ABS-PC,
Ultem, various Glass, Carbon Fibre, ESD, Wood, and Metal Composites.
Software & Connectivity
Slicer1 Simplify3D License (up to 2 devices/license)
Control InterfaceWi-fi Enabled – LAN or Remote Access
Mechanical
Build PlateRemovable Borosilicate Glass on MIC6 Al Plate, PEI Surface
Optional
Drivetrain
XY Resolution (mm)0.025 (theoretical)
Z Resolution (mm)0.001mm (theoretical)
Physical
Footprint (mm)800 x 900 x 1250
体重(公斤)150
Electrical
Supply Voltage110V (220V available on request)
Power Consumption80W/1200W/2000W (Idle/Average/Peak Theoretical)
For more information and to view the AON-M brochure click here.